XRAY: DIFF GASKET (4)
This is a pack of four replacement XRAY Differential Gaskets, and is intended for use with the XRAY T3 family of 1/10 touring cars equipped with th...
View full detailsThis is a pack of four replacement XRAY Differential Gaskets, and is intended for use with the XRAY T3 family of 1/10 touring cars equipped with th...
View full detailsSuspension pivot pins, hardened for very high durability and long life, polished for smooth operation. Used on inboard pivot point of XB4 suspensio...
View full detailsThreaded 4.9mm ball end with 5mm thread length for connection to molded ball joints. Set of 2.
Threaded 4.9mm ball end with 10mm thread length for connection to molded ball joints. Set of 2.
Optional rear wing for XB4 & XB4 2WD. The 1.5mm thick material is highly reliable with less chance of breakage, while at the same time influenc...
View full detailsThe springs have been specifically designed to complement the big bore shocks. Set of 2.The spring rate of the linear springs is constant during th...
View full detailsAlu shims 3x6mm size, 4mm thick, set of 10. Available in Black & Silver
Silicone O-ring fits for 3mm shaft. 2.1mm thick. Set of 10.
Optional springs specifically designed to complement the big-bore shocks. These springs are softer than the 1 dot springs. The spring rate is const...
View full detailsHigh-speed ball-bearings manufactured specially for XRAY. ID x OD x thickness (mm) = 10x15x4. Top-quality professional ball-bearings for a super-fr...
View full detailsNew optional FRONT linear springs are recommended for high-traction tracks. The springs have been specifically designed to complement the big-bore ...
View full detailsThe springs have been specifically designed to complement the big bore shocks. The spring rate is constant during the entire spring compression.The...
View full detailsFRONT linear springs have been specifically designed to complement the big-bore shocks. Spring rate is constant during the entire spring compressio...
View full detailsSpring steel anti-roll bar, 2.0mm thick. This optional anti-roll bar offers different anti-roll stiffness adjustment so that you can fine-tune the ...
View full detailsSpring steel anti-roll bar, 1.8mm thick. Marked with 8 laser-engraved lines for easy identification. This optional anti-roll bar offerw different a...
View full detailsCNC-machined CVD drive shaft coupling. Made from world-renowned Hudy Spring Steel™. Specially hand-ground for maximum precision.
Molded composite set of wheelbase shims, includes 3x6x2mm shims (qty 2), and 3x6x1mm shims (qty 6).
CNC-machined chassis made from 2.5mm high-quality Swiss 7075 T6 aluminum, strategically machined to make it as light as possible without affecting ...
View full detailsRubber O-ring 1.5mm thick x 14mm dia. Set of 10 pieces.
Rubber o-rings in size 12x1mm suggested to use for XRAY XB4 shock absorbers in the upper cap to prevent the shocks from leaking.
Composite safety collar for CVD shafts ensures that the mounting pin is securely contained.
Set of shock pistons made from Delrin and molded using super precise moulds. There are several types of pistons included with different holes and d...
View full detailsCNC-machined 12mm wheel hubs made from Swiss 7075 T6 have +4.5mm offset for wider track-width. Strategically machined for optimum strength, balance...
View full details