Xray
-
-
-
XRAY: BALL END 4.9MM WITH THREAD 10MM (2)
$12.50| /6 availableThreaded 4.9mm ball end with 10mm thread length for connection to molded ball joints. Set of 2.
-
XRAY: BALL END 4.9MM WITH THREAD 5MM (2)
$12.50| /Only 2 left!Threaded 4.9mm ball end with 5mm thread length for connection to molded ball joints. Set of 2.
-
XRAY: BALL END 4.9MM WITH THREAD 6MM (2)
$12.50| /Out of stockThreaded 4.9mm ball end with 6mm thread length for connection to molded ball joints. Set of 2.
-
XRAY: BALL END 4.9MM WITH THREAD 8MM (2)
$12.50| /Out of stockThreaded 4.9mm ball end with 8mm thread length for connection to molded ball joints. Set of 2.
-
XRAY: BALL-BEARING 10x15x4 RUBBER SEALED - GREASE (2)
$8.00| /5 availableHigh-speed ball-bearings manufactured specially for XRAY. ID x OD x thickness (mm) = 10x15x4. Top-quality professional ball-bearings for a super-fr...
View full details -
XRAY: BALL-BEARING 5x9x3 RUBBER SEALED - OIL (2)
$8.00| /8 availableNew high-speed ball-bearings manufactured specially for XRAY. ID x OD x thickness (mm) = 5x9x3. Set of 2 pieces.Top-quality professional ball-beari...
View full details -
XRAY: COMPOSITE C-HUB 6° DEG. LEFT
$10.00| /7 availableMolded composite C-hub for steering block. Caster pre-set at 6°. The roll center position can be easily and quickly adjusted by inserting different...
View full details -
XRAY: COMPOSITE C-HUB 6° DEG. RIGHT
$10.00| /6 availableMolded composite C-hub for steering block. Caster pre-set at 6°. The roll center position can be easily and quickly adjusted by inserting different...
View full details -
XRAY: COMPOSITE C-HUB 9° DEG. LEFT - HARD
$10.50| /3 availableHARD molded composite C-hub for LEFT steering block. Made from super-tough, high-tech composite material. Caster pre-set at 9°. For use with matchi...
View full details -
XRAY: COMPOSITE C-HUB LEFT - HARD
$12.00| /5 availableHARD molded composite LEFT C-hub, suitable for high- and very-high-traction conditions. Generates more steering, more aggressive handling of the ca...
View full details -
XRAY: COMPOSITE C-HUB RIGHT - HARD
$12.00| /6 availableHARD molded composite RIGHT C-hub, suitable for high- and very-high-traction conditions. Generates more steering, more aggressive handling. Use wit...
View full details -
XRAY: COMPOSITE DRIVE SHAFT SAFETY COLLAR - V2 (3)
$9.50| /7 availableComposite safety collar for CVD shafts ensures that the mounting pin is securely contained.
-
XRAY: COMPOSITE GEAR 38T - LCG - GRAPHITE
$12.50| /Out of stockMolded 38T gear made from specially-formulated graphite composite material gives the perfect balance between reliability and performance. Fits LCG ...
View full details -
XRAY: COMPOSITE GEAR DIFF CROSS PIN
$8.50| /Out of stockGear differential cross pin made from tough composite material. Fits #304900 composite gear differential.
-
XRAY: Composite Open Eccentric Bushing Set (2)
$9.00| /4 availableEccentric bushings for adjusting suspension settings, made from tough composite. Fits alu and composite multi-adjustable rear uprights. Two sets of...
View full details -
XRAY: COMPOSITE REAR ROLL-CENTER HOLDER FOR ANTI-ROLL BAR
$10.00| /Only 1 left!Molded rear roll-center holder made from tough composite material. Roll center holder is redesigned to fit the LCG gear box and features updated ro...
View full details -
XRAY: COMPOSITE SET OF SERVO SHIMS (4)
$7.50| /9 availableSet of composite shims for mounting servos to mounting posts. Includes: 3x6x1mm (qty 4), 3x6x2mm (qty 4), 3x6x3mm (qty 4).
-
XRAY: COMPOSITE SET OF SHIMS 3x 3x6x1MM; 1x 3x6x2MM (2)
$6.90| /Only 2 left!Molded composite set of wheelbase shims, includes 3x6x2mm shims (qty 2), and 3x6x1mm shims (qty 6).
-
XRAY: COMPOSITE STEERING BALL JOINT OPEN 4.2 MM (4)
$11.00| /5 availableMolded composite steering ball-joint for XRAY XII Link. Fits 4.2mm pivot ball or ball stud. Set of 4.
-
XRAY: Composite Steering Block - Hard
$11.00| /7 availableHARD molded composite steering block is tiny yet tough, includes graphite Ackermann extension for variable Ackermann positions. Generates less on-p...
View full details -
XRAY: Composite Steering Block - MEDIUM
$11.00| /8 availableMEDIUM-hardness molded composite steering block is tiny yet tough, includes graphite Ackermann extension for variable Ackermann positions. Generate...
View full details -
XRAY: DIFF GASKET (4)
$9.50| /12 availableThis is a pack of four replacement XRAY Differential Gaskets, and is intended for use with the XRAY T3 family of 1/10 touring cars equipped with th...
View full details