MAXIMIZE YOUR RIP!  NEW 2021 IMPROVED CHEMISTRY!  LOWER IR, HIGHER CAPACITY, and FLATTER DISCHARGE CURVE! NEW – 6100MAH, 130C, 7.6V, 2-CELL, SHOR...

FEATURES: All R&D Done in the USA 1:10 Scale / 2-3 Cell / 160 Amp Specifically designed for the highest level of spec and mod racing 2,303 Str...

SPECIFICATIONS: Capacity: 6000mAh 42.92Wh Voltage: 2-Cell (2S), 7.4V C-Rate: 130C (continuous) Dimensions: (L) 139mm x (W) 47mm x (H) 22.5mm Weigh...

Matthew Gonzales – 2020 Florida Carpet Championship – Overall Expert Stock Division Champion! Designed in the USA, we are proud to announce the ALL...

Matthew Gonzales – 2020 Florida Carpet Championship – Overall Expert Stock Division Champion! Designed in the USA, we are proud to announce the ALL...

MAXIMIZE YOUR RIP!  NEW 2021 IMPROVED CHEMISTRY!  LOWER IR, HIGHER CAPACITY, and FLATTER DISCHARGE CURVE! NEW – 4200MAH, 130C, 7.6V, 2-CELL, ULCG...

FEATURES: All R&D Done in the USA 1:8 Scale / 3-6 Cell / 220 Amp Specifically designed for the highest level of spec and mod racing 10awg, Ult...

SPECIFICATIONS: Capacity: 5200mAh 37.00Wh Voltage: 2-Cell (2S), 7.4V C-Rate: 130C (continuous) Dimensions: (L) 95mm x (W) 46mm x (H) 25mm Weight...

Introducing the latest advancement in 1:8 motor technology from Fantom Racing! The new ICON 1:8 motors provide the ultimate raw power demanded by t...

8.5(image is representative of the motor design, but not the wind of the motor) Designed in the USA, we are proud to announce the ALL NEW ICON V2 P...

Walbro WT-990 high-performance carburetor. This is the carburetor recommended by Zenoah for upgrading your RC-style engine. Engines with the standa...

DDM tall velocity stack and gasket. 30.5mm center to center bolt hole spacing. Longer intake tract for improved performance. 1" height. Diameter is...

Rovan Sports spur gear damper bushing Set of 4Will also fit HPI Baja 5B/5T/5SC and King Motor Brands

Rovan Sport Dirt Busters Rear off-road tire set (2pc) without inner foamDirt Busters 170 x 80

Rovan Sport waterproof rear foam New updated compound closed cell foam.

  Rovan NEW stealth light weight 8,000rpm clutch set. Set includes:New Light weight clutch shoes8,000rpm Clutch SpringMounting Hardware Also suites...

Rovan Sports brake pad set for Baja Included is brake block 1 (65032) and brake block 2 (65033)Will also fit HPI Baja 5B/5T/5SC and King Motor

Hostile is proud to announce their first billet offering. One piece rear hub carriers offer several advantages over the stock plastic carriers. -No...

Fits VP Hex Drive Vented Clutch Bell ONLY (Part #GT191) - Custom machined 18T hardened steel pinion gear. - When pinion is taken off the bell can...

XRAY precision molded spur gear 84 tooth, 48 pitch. This spur gear has been strategically lightened to reduce rotating mass. Product released: 3rd...

XRAY precision molded spur gear 84 tooth, 48 pitch. This spur gear has been made from special hard composite material, strategically lightened to ...

Low-friction 3.5mm drive pin clips for protecting and cushioning drive shaft pin in diff outdrives. Made from all-new, extra-strong composite mixt...

Molded composite steering block of “hard” hardness (H) for foam-tire racing. The steering block features two Ackermann positions, and uses small b...

This is a replacement XRAY X-Stiff Composite Servo Saver Set, and is intended for use with the XRAY T3'11, T3’12, XII, X12 and X10 Link vehicles. T...

Optional specially-modified high-performance Kevlar®-reinforced 513mm-long, 3mm-wide front drive belt.This belt is very thin and elastic as possib...

Set of two adjustable turnbuckle for adjusting camber of rear uprights, manufactured from world-renowned top-secret "Hudy Spring Steel". Product r...

Optional specially-modified high-performance Kevlar®-reinforced 189mm-long, 3mm-wide rear drive belt.This belt is very thin and elastic as possible...

Molded composite 4.9mm ball joints, open on both sides, for connection to 4.9mm ball. Set of eight. Fits XRAY T2, T3, T4, RX8, XB8, NT1, X1 and GT...

Molded composite C-hub for right steering block of T2, T3. Caster pre-set at 4°. Medium rigidity for rubber-tire racing. Use with matching left-si...

XRAY XB8’21 All-new 2021. Updated chassis design incorporates keyed steering posts, new fuel tank position and new mounting positions for chassis...

XRAY XB8’21 with FX K301 Engine Combo All-new 2021. Updated chassis design incorporates keyed steering posts, new fuel tank position and new moun...

2021 All-new Features: Next generation of the multi-time World Champion XB4 platform Available in Carpet and Dirt Editions ready for high or low ...

HARD rear lower LEFT suspension arm made from super-tough, high-tech composite material gives a perfect balance between reliability and performance...

Carbide balls 2.4mm for ball differential. Improved, smoother diff operation over standard steel diff balls. These carbide balls are much harder th...

Tough molded composite radio plate allows for mounting the receiver and speed controller for quick & easy removal and assembly. The integrated ...

CNC-machined eccentric mounting plate made from premium Swiss 7075 T6 aluminum. The motor is connected to this eccentric mounting plate with the as...

HARD rear lower LEFT suspension arm made from super-tough, high-tech composite material gives a perfect balance between reliability and performance...

HARD rear lower RIGHT suspension arm made from super-tough, high-tech composite material gives a perfect balance between reliability and performanc...

Front lower long suspension arm made from super-tough high-tech composite material suitable for most track conditions. Longer suspension arm have r...

Torque(6.0V): 9.0 kg-cm (125.0 oz/in)Torque(7.4V): 12.0 kg-cm (166.6 oz/in)Speed: 0.07 sec (6.0V) │ 0.06 sec (7.4V)Operating Voltage：6.0 ~ 8.4 DC V...

Torque(6.0V): 11.5 kg-cm (159.7 oz/in)Torque(7.4V): 15.0 kg-cm (208.3 oz/in)Torque(8.4V): 16.5 kg-cm (229.1 oz/in)Speed: 0.072 sec (6.0V) │ 0.060 s...

Torque(6.0V): 9.5 kg-cm (131.9 oz/in) Torque(7.4V): 12.5 kg-cm (173.6 oz/in)Speed: 0.068 sec (6.0V) │ 0.059 sec (7.4V)Operating Voltage：6.0 ~ 7.4 D...

Torque(6.0V): 21.0 kg-cm (291.6 oz/in)Torque(7.4V): 25.0 kg-cm (347.1 oz/in)Speed: 0.10 sec (6.0V) │ 0.085 sec (7.4V)Operating Voltage：6.0 ~ 8.4 DC...